Archive for August, 2015

2015 Reading Air Fest – Classic Car Show

August 30th, 2015

The 2013 Car Show at The READING AIR Fest was a big hit! Car owners and enthusiasts from all over came out in big numbers to see Woody Wagons, Model A’s, Low Riders from decades past. Famous vehicles like “Nellybelle” from the Roy Rodgers Show were even on display.
This year’s Classic Car Show is Saturday only and will see a bigger turnout and a wider range of vehicles on The North Ramp for one BIG weekend, September 11th & 12th, 2015. With all The READING AIR Fest has to offer, it’s sure to become an instant classic!
Registration fee:
$10 per vehicle
(includes 2 Air Show passes)
**arrival and departure details will be posted shortly**

Pre-registration is required. “E-mail with your Name, Phone Number, Year, Make and Model of your vehicle and which day you will be attending. We will see you in September!”
Entries are limited to the first 150 registrations.

 119c Air Museum Drive
Reading, Pa. 19605

Toll Free: 1.866.905.7492
Phone: 610.288.2496
Fax: 610.288.2498

Posted in Information, Web Announcements | Comments (0)

2015 Reading Air Fest

August 30th, 2015

The READING AIR Fest dates for 2015 have been announced!
Friday & Saturday September 11th and 12th are set for READING AIR’s 3rd Annual Air Fest.

Friday Night Time Air Show
Saturday Traditional Daytime Air Show

“AIR FEST After Dark”
This new addition to READING AIR Fest features spectacular night time aerobatic demonstrations by several performers in the night sky over The North Ramp, followed by a Fireworks Display! Gates Open at 3 pm on Friday with the addition of “Air Fest After Dark” at 6 pm. 

READING AIR Fest continues Saturday, on the ground and in the air, when the gates open at at 11 am and the traditional Day Time Air Show resumes at 2 pm. 
Plan to join us for this exciting weekend on The North Ramp.

More information HERE

Posted in Aircraft, Airshows, Information, Web Announcements | Comments (0)

My Windows 7 Pro to Windows 10 Pro upgrade experience

August 17th, 2015


Before the D-Day Upgrades

We have four computers running Microsoft Windows 7 Pro, 2 HP DV6T laptops (2012) and 2 DELL (Studio XPS) desktops.  The latter DELL’s are I5 and I7 first generation (2009) processors.  My initial concerns were hardware/software drivers since 3 of the 4 have had various components replaced over the years (hard disks, video cards, more memory, USB3 adapters…etc). If you reserved your copy of Windows 10 you can perform a hardware / software compatibility checks directly on the checker board notification icon in your system tray.  All of our hardware passed as well as software.


My Typical prep work before the upgrades included:

  1. get rid of old vendor recovery partitions (using free mini-tool partition manager),
  2. Remove vendor “bloatware”,
  3. making sure the computers met Windows 10 install requirements,
  4. use Acronis True Image 2015 to do complete image backups on external USB3 drives,
  5. use BELARC Advisor to baseline the final Windows 7 and new Windows 10 configurations (saving in .pdf files),
  6. using Ccleanup to cleanup system / reg junk,
  7. make sure your internet connection is stable,
  8. use AC power for laptops since the processing is long,
  9. and finally, removing apps that you know you’re not going to use. This is OBE if you’re doing a clean install which I did.
  10. This list is not conclusive…..


You have to upgrade first to get your system activated with Microsoft.  The only exception to this rule is if you install with a retail (purchased) key.

You will not receive a physical or know what the KEY is like past versions of Windows.  You will need to look at Windows 10 All Settings –> Update and security –> Activation panel to verify that your OS is activated.  If not, give it some wait time (I’ve read some folks waited up to a week).  If you want to know the product id and key, use BELARC Advisor but I think the free upgrade KEY is the same for everyone.

Once the OS is activated, it’s for the life of the machine it’s installed on ie non-transferable to a new machine. A retail KEY is transferable to another machine (not sure of the key deactivation process or a phone call to Microsoft).  If a re-install from scratch is necessary on original machine, no need to know the KEY because it’s already stored in Microsoft’s activation database and it should activate all by itself.

The system(s) Upgrade Process

Only one of the four got the official update notification (my wife’s dell desktop).  The other 3 were reserved but no notifications came through as of yet.  My upgrade plan was to try Windows 10 on my laptop for a couple of weeks for go-nogo to proceed with “clean install” OS installs.

Our HP DV6T i7 / i5  Laptop Upgrades

The upgrade for my laptop went pretty smooth. Not receiving the formal upgrade notice from Microsoft, I decided to use Microsoft’s MediaCreationTool to download and save the upgrade files to flash (thumb drive).  Once downloaded you can run setup.exe from the flash and a complete upgrade is done in place preserving settings, apps, etc. The previous Windows 7 pro apps, settings, etc are saved in a directory c:\windows.old.  I tried Adobe Photoshop CC and Lightroom CC and the overall performance of my laptop was, I thought, slower.

I continued on with my laptop clean installClean install entails booting on the flash drive and re-installing Windows 10 Pro without preserving settings apps, etc.  All the previous file data is however,  preserved in a directory called c:\windows.old.000 (clean install) and it leaves the original c:\windows.old alone.  You can download Microsoft’s Windows 10 32/64bit, Home/Pro .iso directly HERE.  After the clean install performance was much better but I had no apps installed.  Since d-day I have all of my apps reinstalled and performance in Photoshop CC and Lightroom CC are faster as well as Dreamweaver.  Overall, I am quite happy with my laptop.

Following the same methodology I continued on to my and my wife’s laptop which installed OK but performance and boot time (boot 10-15 minutes) was unacceptable and this was done with a Clean install.  After fooling around with her laptop for about a week, we decided to go back to Windows 7 Pro.  Since we made an image backup we had her system back and running is less than 30 minutes.  God bless backups!

Our DELL Desktop i7 / i5 Upgrades

My wife’s desktop was a true test of getting the whole update from Microsoft and installing just like a regular patch or service pack install. It went flawless and took a long time.  This type of upgrade does not give you the option to save to .iso or flash to usb thumb drive.  It’s just a flat out OS replacement leaving everything in place.  It still does save the previous OS files in c:\windows.old.  Again, I tried boot and some of the everyday apps to get a feel for performance.  I judged it was a little slower but not earth shattering.  I proceeded with the “Clean install“, getting the .iso file from Microsoft (here).  This was flawless, the OS was already activated from before and performance was considerably better.

Moving onto my desktop however, was a total nightmare.  I spent 3+ days combing through internet posts about the error “Something Happened.  Windows 10 failed to install“.  Since this is the computer that we use to do all of our business on, it was a priority to get it back and running.  I decided to buy a KEY ($199 from  Bye, bye to free upgrade.

I download the Microsoft Windows (x64, PRO, English) .iso from Here, flashed it to USB thumb drive and booted up from the USB2 thumb drive device.  When it asked for KEY, you supply the retail KEY.  I optioned to install a new system (it still saves previous data files in c:\windows.old) and the OS installed just like in the old days.  Flawless, old days type of windows install you’d expect.

I am satisfied with the overall Windows 10 Pro performance.  Windows 7 boot time on my desktop was almost 13 minutes.  Windows 10 clocked just over 2.5 minutes on the same computer.  I do have 3 Buffalo 3TB Drivestation USB 3.0 external drives attached which accounts for some of the boot time delay.  Although I cleaned up my system before upgrade, I ended up not re-installing several apps that I never use. I do have Adobe CC installed (Photoshop, Dreameaver, Acrobat Pro, Media encoder, Lightroom, Flash Pro, NIK tools and OnOne PhotoSuite 9.5).  These new installs have been optimized for Windows 10 to mention a few and perform great.


I would say the pain level of my multiple upgrade experience was 4 out of 10 (0 being no pain, 10 being max pain)  but I feel it was worth it. I was surprised at how well drivers were matched up.  The two laptops have switchable graphics cards, Intel, Nvidia and AMD.  I did go to their sites and download the latest to be safe.

I don’t like Microsoft forcing post Windows 10 updates, especially drivers. I have 3 out of 4 computers running Windows 10 Pro and have already taken updates (except kb3081438 which was a problem for my laptop but no impact to my 2 desktops).  All three computers has Show and/or hide windows updates installed to screen out hardware drivers and kb3081438.

It’s a crap shoot as to how well the upgrade is going to work for you.  Unfortunately, most folks don’t have extra computers to test the upgrade process on.  To that end I would suggest — wait a little while until the Windows 10 upgrade environment is more stable, especially if you have old hardware.  There are thousands of posts on the internet right now, talking about Windows 10 installation problems.

Some useful tools and information

If there are any questions or comments about this post, please feel free to email here

Posted in Documentation, Enhancements, Information, Software Upgrades, Web Announcements | Comments (0)