Archive for the ‘Enhancements’ Category

My Windows 7 Pro to Windows 10 Pro upgrade experience

August 17th, 2015

Windows-10-Logo

Before the D-Day Upgrades

We have four computers running Microsoft Windows 7 Pro, 2 HP DV6T laptops (2012) and 2 DELL (Studio XPS) desktops.  The latter DELL’s are I5 and I7 first generation (2009) processors.  My initial concerns were hardware/software drivers since 3 of the 4 have had various components replaced over the years (hard disks, video cards, more memory, USB3 adapters…etc). If you reserved your copy of Windows 10 you can perform a hardware / software compatibility checks directly on the checker board notification icon in your system tray.  All of our hardware passed as well as software.

Preparation

My Typical prep work before the upgrades included:

  1. get rid of old vendor recovery partitions (using free mini-tool partition manager),
  2. Remove vendor “bloatware”,
  3. making sure the computers met Windows 10 install requirements,
  4. use Acronis True Image 2015 to do complete image backups on external USB3 drives,
  5. use BELARC Advisor to baseline the final Windows 7 and new Windows 10 configurations (saving in .pdf files),
  6. using Ccleanup to cleanup system / reg junk,
  7. make sure your internet connection is stable,
  8. use AC power for laptops since the processing is long,
  9. and finally, removing apps that you know you’re not going to use. This is OBE if you’re doing a clean install which I did.
  10. This list is not conclusive…..

IMPORTANT

You have to upgrade first to get your system activated with Microsoft.  The only exception to this rule is if you install with a retail (purchased) key.

You will not receive a physical or know what the KEY is like past versions of Windows.  You will need to look at Windows 10 All Settings –> Update and security –> Activation panel to verify that your OS is activated.  If not, give it some wait time (I’ve read some folks waited up to a week).  If you want to know the product id and key, use BELARC Advisor but I think the free upgrade KEY is the same for everyone.

Once the OS is activated, it’s for the life of the machine it’s installed on ie non-transferable to a new machine. A retail KEY is transferable to another machine (not sure of the key deactivation process or a phone call to Microsoft).  If a re-install from scratch is necessary on original machine, no need to know the KEY because it’s already stored in Microsoft’s activation database and it should activate all by itself.

The system(s) Upgrade Process

Only one of the four got the official update notification (my wife’s dell desktop).  The other 3 were reserved but no notifications came through as of yet.  My upgrade plan was to try Windows 10 on my laptop for a couple of weeks for go-nogo to proceed with “clean install” OS installs.

Our HP DV6T i7 / i5  Laptop Upgrades

The upgrade for my laptop went pretty smooth. Not receiving the formal upgrade notice from Microsoft, I decided to use Microsoft’s MediaCreationTool to download and save the upgrade files to flash (thumb drive).  Once downloaded you can run setup.exe from the flash and a complete upgrade is done in place preserving settings, apps, etc. The previous Windows 7 pro apps, settings, etc are saved in a directory c:\windows.old.  I tried Adobe Photoshop CC and Lightroom CC and the overall performance of my laptop was, I thought, slower.

I continued on with my laptop clean installClean install entails booting on the flash drive and re-installing Windows 10 Pro without preserving settings apps, etc.  All the previous file data is however,  preserved in a directory called c:\windows.old.000 (clean install) and it leaves the original c:\windows.old alone.  You can download Microsoft’s Windows 10 32/64bit, Home/Pro .iso directly HERE.  After the clean install performance was much better but I had no apps installed.  Since d-day I have all of my apps reinstalled and performance in Photoshop CC and Lightroom CC are faster as well as Dreamweaver.  Overall, I am quite happy with my laptop.

Following the same methodology I continued on to my and my wife’s laptop which installed OK but performance and boot time (boot 10-15 minutes) was unacceptable and this was done with a Clean install.  After fooling around with her laptop for about a week, we decided to go back to Windows 7 Pro.  Since we made an image backup we had her system back and running is less than 30 minutes.  God bless backups!

Our DELL Desktop i7 / i5 Upgrades

My wife’s desktop was a true test of getting the whole update from Microsoft and installing just like a regular patch or service pack install. It went flawless and took a long time.  This type of upgrade does not give you the option to save to .iso or flash to usb thumb drive.  It’s just a flat out OS replacement leaving everything in place.  It still does save the previous OS files in c:\windows.old.  Again, I tried boot and some of the everyday apps to get a feel for performance.  I judged it was a little slower but not earth shattering.  I proceeded with the “Clean install“, getting the .iso file from Microsoft (here).  This was flawless, the OS was already activated from before and performance was considerably better.

Moving onto my desktop however, was a total nightmare.  I spent 3+ days combing through internet posts about the error “Something Happened.  Windows 10 failed to install“.  Since this is the computer that we use to do all of our business on, it was a priority to get it back and running.  I decided to buy a KEY ($199 from amazon.com).  Bye, bye to free upgrade.

I download the Microsoft Windows (x64, PRO, English) .iso from Here, flashed it to USB thumb drive and booted up from the USB2 thumb drive device.  When it asked for KEY, you supply the retail KEY.  I optioned to install a new system (it still saves previous data files in c:\windows.old) and the OS installed just like in the old days.  Flawless, old days type of windows install you’d expect.

I am satisfied with the overall Windows 10 Pro performance.  Windows 7 boot time on my desktop was almost 13 minutes.  Windows 10 clocked just over 2.5 minutes on the same computer.  I do have 3 Buffalo 3TB Drivestation USB 3.0 external drives attached which accounts for some of the boot time delay.  Although I cleaned up my system before upgrade, I ended up not re-installing several apps that I never use. I do have Adobe CC installed (Photoshop, Dreameaver, Acrobat Pro, Media encoder, Lightroom, Flash Pro, NIK tools and OnOne PhotoSuite 9.5).  These new installs have been optimized for Windows 10 to mention a few and perform great.

Conclusion

I would say the pain level of my multiple upgrade experience was 4 out of 10 (0 being no pain, 10 being max pain)  but I feel it was worth it. I was surprised at how well drivers were matched up.  The two laptops have switchable graphics cards, Intel, Nvidia and AMD.  I did go to their sites and download the latest to be safe.

I don’t like Microsoft forcing post Windows 10 updates, especially drivers. I have 3 out of 4 computers running Windows 10 Pro and have already taken updates (except kb3081438 which was a problem for my laptop but no impact to my 2 desktops).  All three computers has Show and/or hide windows updates installed to screen out hardware drivers and kb3081438.

It’s a crap shoot as to how well the upgrade is going to work for you.  Unfortunately, most folks don’t have extra computers to test the upgrade process on.  To that end I would suggest — wait a little while until the Windows 10 upgrade environment is more stable, especially if you have old hardware.  There are thousands of posts on the internet right now, talking about Windows 10 installation problems.

Some useful tools and information

If there are any questions or comments about this post, please feel free to email here

Posted in Documentation, Enhancements, Information, Software Upgrades, Web Announcements | Comments (0)

tomswarbirds.com Lightroom Galleries undergoing upgrade from Flash to TTG CE4 Page (html)

July 17th, 2015

The position of the global digital community is: Adobe Flash is dead due to all the security flaws found in this plugin.  I have started upgrading the old Adobe Flash Web galleries (pre Lightroom 6) on the site to TTG (The Turning Gate CE4 Page template).  TTG substitutes html for Flash (files are created in .php).  With the advent of Lightroom 6 (Lr6) new features, I am re-evaluating and re-editing past slides (time consuming).

The TTG visual slide presentations in Lr Gallery will be vastly different than the original Adobe flash shows.  Most notability, TTG will only display 50 slides at a time for the desktop slide show.  After 50 you must hit “Next” to go to next page and hit the play arrow (top right).  I am told a fix is coming to allow full slide show playing.  The mobile version of TTG is unaffected but does not offer auto slideshow presentation (you must click the right and left arrows on the slide to advance forward or backward (annoying).  You can watch the same slide shows with full play/replay/pause by going to the “Photo Gallery” Tab.

The only item on this site that remains “Flash” is the header of every tomswarbirds.com page (excluding piwigo library).  A fix to remove this flash is coming as well.

Posted in Documentation, Enhancements, Fixes, Information, Photography, Software Upgrades, Web Announcements | Comments (0)

blog.tomswabirds.com goes on line

January 15th, 2015

cropped-IMG_79759154596221.jpeg

Installed latest server version of WordPress and created tomswarbirds.com  blog (news) widget.  For now,  this widget is “read only” ie no community comments accepted.  Taking this action will reduce site and database spam.  Interested  folks can email : admin@tomswarbirds.com for approval and logon account.

Posted in Enhancements, Web Announcements | Comments (0)

Added new “News” feed from blog.tomswarbirds.com

January 15th, 2015

cropped-IMG_79759154596221.jpeg

Added updated “News” feed which reads from tomswarbirds.com blog site.  The widget scrolls automatically but this can be stopped by placing cursor in scrolling window.  Also, while in the window a scroll bar will appear on the right side of the frame.  This allows you to do manual scrolling.

Posted in Enhancements, Web Announcements | Comments (0)

RSS feeds added to Tom’s Warbirds.com

January 15th, 2015

cropped-IMG_79759154596221.jpeg

Added (9) external RSS feeds on new page: Tom’s WarBirds Aviation RSS feeds

Scrolling is normal reading speed but if you hold your cursor in one of the RSS windows, the content will stop scrolling.

Javascript code was generated using on-line free software “Freewind”©  (http://feed.mikle.com/)

Posted in Enhancements, Web Announcements | Comments (0)

Tom’s Warbirds.com web code moved to Adobe Dream Weaver CC

January 10th, 2015

dreamweaverCC

All code moved to Adobe DreamweaverCC with auto sync to 1and1.com test server.  Really nice software pkg, easy to use with tons of help available from Adobe on line.

Posted in Enhancements, Information, Web Announcements | Comments (0)

Redesigned Tom’s Warbirds.com goes on line

December 30th, 2014

cropped-IMG_79759154596221.jpeg

About Tom’s WarBirds.com

Tom’s Warbirds.com is dedicated to those folks who love and admire WWII warbirds, fighers, bombers and classic / vintage automobiles. Most of the site is photographic collections of past and present local airshows (and carshows). Recently we have added you-tube WWII footage and public domain movies such as ’30 Seconds over Tokyo’, ‘The Right Stuff’ (NASA Mercury program), ‘Sink the Bismark’, 26 episodes of ‘Victory at Sea’ which aired in the 1950’s.

Tom’s WarBirds.com is a Linux Piwigo.org project and is frequently updated. Recommendations / Comments are welcomed — [Click here]

History

In 2006 the leagcy system started out as Adobe Lightroom Web collections hosted on local ISP servers but after a year this became obsolete due to lack of space and maintenance.

2007 saw the leagcy system move to 1and1.com and after a year this platform became to hard to maintain. In 2008 we searched the web and found two free database projects called Gallery2/Gallery3 (beta) and PhpWebGallery/Piwigo. After comparing enhancements, G2 (later upgraded to G3) seemed like the logical choice so we built on our linux and MySql platforms. This system was operational from 2008 until later in 2014 when support for G3 expired. At this point, feeling lost,  we decided to host Piwigo on our existing linux platform under a new domain and database, tomswarbirds.com.

Old references to new domain still exist under: http://szewczuk.net(G3), http://tomsatc.szewczuk.net(G3), webgallery.szewczuk.net(G2) and webgallery3.szewczuk.net(G3). In 2015-16  we plan to remove the old references.

Future Plans

There are many plans in the works for this site most notably moving to WordPress platform. We will also start captioning / keywording all the gallery photos for easy search of aircraft and cars. Other enhancements include: technical library, more WWII footage, NASA updates, around the web WWII and NASA news feeds (RSS) and possibly a blog.

The ultimate goal of Tom’s Warbirds.com is to become a central repository of WWII aircraft photography both past and present, technical information, airshow locations, stories, etc and a place to catapult research projects and curiosity — a place to start looking for WWII warbird information and pilots who flew them.

Please visit the News area to keep up tp date.

Internet Browser Notes

Please visit the News area to keep up tp date.

Posted in Enhancements, Information, Software Upgrades, Web Announcements | Comments (0)